dist/0040755000000000000000000000000007460272271010532 5ustar rootrootdist/dpciindust.h0100644000000000000000000000107707460276124013054 0ustar rootroot #ifndef DPCIINDUST_H #define DPCIINDUST_H #include #define dpciindust_major 159 #define MAXCARD 8 #define REGIONLENGTH 8 #define DPCIINDUST_WRITE_PORT _IOW(dpciindust_major, 0 , int) #define DPCIINDUST_READ_PORT _IOR(dpciindust_major, 1 , int) #define DPCIINDUST_SELECT_PORT _IOW(dpciindust_major, 2 , int) #define DEVICE_NAME "dpciindust" #define PORT1 0 #define PORT2 1 #define PORT3 2 #define PORT4 3 int ReadPciIndustPort(int file_desc,int port); int WritePciIndustPort(int file_desc,int port,int data); #endif dist/dpciindustlib.c0100644000000000000000000000072407460272255013535 0ustar rootroot#include "dpciindust.h" #include /* ioctl */ int WritePciIndustPort(int file_desc, int port,int value) { int ret_val; ret_val = ioctl(file_desc, DPCIINDUST_SELECT_PORT, port); ret_val = ioctl(file_desc, DPCIINDUST_WRITE_PORT, value); return ret_val; } int ReadPciIndustPort(int file_desc, int port) { int ret_val=0; ioctl(file_desc, DPCIINDUST_SELECT_PORT, port); ioctl(file_desc, DPCIINDUST_READ_PORT, &ret_val); return ret_val; } dist/dpciindust.o0100644000000000000000000001023407460276116013057 0ustar rootrootELFx4(UEf@8%;|1]Ð&U 1]Ít&UEP RR89Et ;}E ]Ív'U1U 9U]HÍUM Effff%AA]Í'U1ɉS1U ]JBfff[]ÍUSPEU]f@8@t+@w@t#t8vv]EULjESjRQSt&EPEjPQ!؃9B uEC؃9B ʅuE1]]É'UDWV1@S 1DH~ hu't&1ZRRPh@ jQhxhejRhGPVhhffƃuu hSSWh =hhehǃy/1;}!QCjRh;|߉ h1e[^_]ÍUS1Q;}"RCjPh;|QQheh$@]]`@01.01kernel_version=2.4.3-20mdkauthor=Deltadescription=Decision PCI Industrial Card Driver   <3>This drive only can open one time. PCI Industrial card:I got a base %x dpciindust I can't find any Decision PCI Industrial card here!! PCI Industrial card: Total %d cards that I catched! PCI Industrial card:Register Successful PCI Industrial card:Unregister Successful!! GCC: (GNU) 2.96 20000731 (Linux-Mandrake 8.0 2.96-0.48mdk).symtab.strtab.shstrtab.text.rel.text.data.rel.data.bss.note.modinfo.fixup.rel.fixup__ex_table.rel__ex_table.rodata.comment@! t+@H 1 D(;@Fp OV la$l |  {@m <   5;@N`F^o sDD jU 8 3*@ @0,3CRcs jUdpciindust.cgcc2_compiled.__module_kernel_versioncardsdpciindust_releasedpciindust_readdpciindust_writerevdpciindust_fopsdev_count.0dpciindust_initdpciindust_exitdpciindust_open__this_moduleBase_AddrMyreadMywritedpciindust_ioctl__module_author__module_descriptionpcibios_presentprintkioport_resource__check_region__request_regionpci_find_deviceregister_chrdev__release_regionunregister_chrdevinit_modulecleanup_module#(0EKW/"4?Id} ! "# )$:CM R%[jqw| %&  (   dist/install0100755000000000000000000000113207460272255012122 0ustar rootroot#!/bin/sh module="dpciindust" device="dpciindust" group="root" mode="664" major="159" # invoke insmod with all arguments we got /sbin/insmod -f $module.o $* || exit 1 #major=`cat /proc/devices | awk "\\$2==\"$module\" {print \\$1}"` # Remove stale nodes and replace them, then give gid and perms # Usually the script is shorter, it's scull that has several devices in it. rm -f /dev/${device}[0-3] mknod /dev/${device}0 c $major 0 mknod /dev/${device}1 c $major 1 mknod /dev/${device}2 c $major 2 mknod /dev/${device}3 c $major 3 chgrp $group /dev/${device}[0-3] chmod $mode /dev/${device}[0-3] dist/Readme.txt0100644000000000000000000000173007460272255012470 0ustar rootrootHere is the linux driver of Decision PCI Industrial card. And this driver is tested well on the kernel with version 2.4.3-20mdk. To decompress the file: tar -xvzf pciindustdist.tgz After you decompress the pciindustdist.tgz file, do the following steps: ->1.Login as root. ->2.chmod +x install ->3.chmod +x uninstall ->4.install After you run 4th step , you will see "Register Successful", then it will build a device node in "/dev" named "/dev/dpciindust". If you want to remove the driver , please run the 5th step. 5.uninstall Note: You can compile "test.c". It tests output of Decision Industial card. Another "test1.c" is used to test input. There are 2 function on this driver: int WritePciIndustPort(int file_desc,char data); - Use to send data. Where: file_desc data - the value to send char ReadPciIndustPort(int file_desc); - Use to get data. Where: file_desc - is the file handle For more information please see the dpciindust.h dist/test1.c0100644000000000000000000000114007460272255011731 0ustar rootroot#include "dpciindust.h" #include "dpciindustlib.c" #include #include /* open */ #include /* exit */ #include #include /* Main - Call the ioctl functions */ main() { int file_desc,data,i,j=0; char buf[255]; sprintf(buf,"/dev/%s0\0",DEVICE_NAME); file_desc = open(buf, O_RDONLY); if (file_desc < 0) { printf ("Can't open device file: %s\n", buf); exit(-1); } WritePciIndustPort(file_desc,PORT1,0x65); printf("I write 0x65\n"); printf("I read 0x%02x\n",ReadPciIndustPort(file_desc,PORT1)); close(file_desc); } dist/test.c0100644000000000000000000000150707460272255011657 0ustar rootroot#include "dpciindust.h" #include "dpciindustlib.c" #include #include /* open */ #include /* exit */ #include /* Main - Call the ioctl functions */ main() { int file_desc, i,count=0; char buf[255]; int b=1; char *msg = "Message passed by ioctl\n"; sprintf(buf,"/dev/%s0\0",DEVICE_NAME); file_desc = open(buf, O_RDONLY); if (file_desc < 0) { printf ("Can't open device file: %s\n", buf); exit(-1); } WritePciIndustPort(file_desc,PORT1,0x0f); do{ WritePciIndustPort(file_desc,PORT1,b); b=b<<1; count++; if(count%8==0) b=1; if(count%2==0) WritePciIndustPort(file_desc,PORT1,b); else WritePciIndustPort(file_desc,PORT1,b+0xff00); sleep(1); } while(count<1000); close(file_desc); } dist/uninstall0100755000000000000000000000026007460272255012466 0ustar rootroot#!/bin/sh module="dpciindust" device="dpciindust" # invoke rmmod with all arguments we got /sbin/rmmod $module $* || exit 1 # Remove stale nodes rm -f /dev/${device}[0-3]